Homepage > meiyong

Bucket elevator

bf7e7cbb59302673308d7e0dbe772b72.jpg

Product overview of TD type bucket elevator:
TD type bucket elevator according to JB3926-85 "vertical bucket elevator" standard design and manufacture, at present domestic commonly used bucket elevator are vertical type, more new. Bucket type lifting machine which is used in the vertical conveying powder, granular and small block mill cut smaller bulk materials, such as grain, coal, cement, crushed ore, enhance the height of the highest 40m. TD type bucket is equipped with four types of Q hoist (Qian Dou), H (arc bottom bucket), type ZD (deep bucket) SD (deep bucket).

Main features of TD type bucket elevator:
Driving power is small, the inflow type feeding, induced by unloading material, large capacity hopper intensive layout. The material lifting almost no feed back and dig material phenomenon and is therefore invalid less power.
2. Enhance the range, this type of hoist the kinds of materials, performance requirements, not only can improve the general powdery, granular materials and improve grinding Zhuo of larger material. Good sealing performance and less environmental pollution.
3 good operating reliability, advanced design principles and processing methods to ensure the reliability of the whole operation, no failure time more than 20 thousand hours. The lifting height is high, and the lifting machine runs stably, so the height of the lifting height can be achieved.
4. The use of long life, to enhance the inflow type feeding machine, without the need to use a bucket material, material rarely occur extrusion and collision phenomenon. This machine in the design to ensure the materials in the feeding and unloading is less scattered, reduces the mechanical wear.

Table of main technical parameters of TD type bucket elevator:
ModelTD160TD250TD315TD400
Hopper formQhzDSdQhzDSdQhzDS dQhzDSd
Transport volume
(m³/h)
5.49.69.616122223351730254024464166
Bucket width
﹙mm﹚
160250315400
Bucket capacity
﹙L﹚
0.50.94.21.91.32.23.04.623.63.85.83.15.65.99.4
Bucket distance
﹙mm﹚
280350360450400500480560
bandwidth﹙mm﹚200300400500
The speed of the bucket﹙m/s﹚1.41.61.61.8
Bulk material
﹙mm﹚
25354555
ModelTD500TD630TD160TD250TD350TD450
Hopper formQhzDSdhzDSdQSQSQSQS
Transport volume
(m³/h)
3870589285891424.78182225425072
Bucket width
﹙mm﹚
500630160250350450
Bucket capacity
﹙L﹚
4.899.3151414.623.50.651.12.63.277.814.515
Bucket distance
﹙mm﹚
500625710300400500640
bandwidth﹙mm﹚600700200300400500
The speed of the bucket﹙m/s﹚1.8211.251.251.25
Bulk material
﹙mm﹚
607025354555