Homepage > meiyong

Glass bead burning furnace


Glass bead burning furnace
Device name       ModelNumberRemarksElectricity
With the circulating water jacket forming chamber


Molding collection room (broad gallbladder)2.8metre*9metre1set

Steel air duct0.4metre*16metre1set

Steel heat pipe0.4metre*16metre1set

Heat circulating air chamber0.04metre*1.25metre*2.5metre1individual

Cooling water tank2.5metre*2.5metre*1.25metre1individual

Water circulating pump
2platformOne use and one prepare
Gas water with oxygen gun3.8/4.2/4.552individualA total of 3 sets
Glass sand feeder
14setFrequency regulation
Air inlet valve


Work inspection repair platform4metre*4metre2layer

Cyclone dust collector
1setAutomatic dust collection
steam trap

Storage bin

Distribution box for production equipment

Sketch of the main equipment (specific dimensions to delivery in kind prevail)


About the environment
1, water: the production process of water for the cycle of water, the role of cooling to protect the furnace gallbladder to prevent high temperature deformation and cooling the product cooling. All the water without the need for efflux, only the sink cycle pool facilities. In addition, the production process used in the circulating water does not add any material, no toxic and harmful substances, water quality without any change in nature, but the cold water boiling water in the cooling cycle of the process, so there is no water pollution problems.

2, the dust: the raw materials for this product for the purchase of glass sand, according to national standards and quality requirements of its particle size of 600-180 microns, the smallest particles for the 125 microns. So from the material to the products are micro-particles, no dust state. In addition the glass itself is much larger than the density, will not produce dust, so the production process will not appear dust pollution problems.

3, the production process of the main fuel coking gas (natural gas) without any added material, it will not produce toxic dust pollution.